MultiCut™ Glitter Heat Transfer Vinyl 20"

• Accessories Required
  Computer, Cutter, Heat Press, Heat Transfer Vinyl
• Cutting Notes
  You should always test cut prior to any production run. Cutter settings may need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
• Cutting Glitter
  Due to the thickness of this material, if the maximum 250gf does not cut through the material, it may be necessary to manually adjust the pen force slider below the power button on your GX24. Please ensure to return the slider back to its original position after cutting sparkle.  Alternatively, you can use a 60-degree blade to cut these materials as well.
• Care Instructions
  Machine wash using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not iron directly onto this material.
• Storage
  MultiCut Lustre has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight, and humidity. Keep backing free of dust and other particles

Do not use a Teflon sheet  when pressing

• 100% cotton
• 100% polyester
• Poly/cotton blends

1. Feed material into the cutter so that the matte side is face up.

2. Design and cut your graphic in reverse (mirror image).

3. Weed away excess material using tweezers or weeding tool.

4. Preheat your fabric and position weeded image on a shirt with Glossy side face up.

5. Heat press the material onto the shirt. Press at 300-330F for 15 seconds. Use medium pressure. Do not use Teflon sheets when pressing.

6. Peel Mylar backing warm.