Skip to content
en
CAD

Due to the Canada Post strike and increased demand on all other couriers, shipping delays are expected across all services.

Welcome to Joto Imaging Supplies! Helping Businesses Since 1989

Paropy™ Heat Transfer Paper Color Laser Ceramic Plus - Pack of 100

Regular price $66.00

P-CLHS3-GEN-LT

  • Letter (8.5" x 11")
  • Tabloid (11" x 17")

A Laser transfer paper ideally for ceramics, glass, etc using color laser printers or copiers. It is a self-trimming paper meaning it only transfers the toner, produces bright colors. When printing the image, it needs to be mirrored using a medium to heavy pressure at 300F for 150-180 seconds.

Paropy™ Heat Transfer Paper Color Laser Ceramic Plus - Pack of 100 - Joto Imaging Supplies Canada
Paropy™ Heat Transfer Paper Color Laser Ceramic Plus - Pack of 100

Paropy CL Ceramic Plus is designed for printing onto ceramic substrates. It is compatible with most color laser copiers and printers.

If using a CMYK Laser Printer, the printing area of the substrate needs to be white or light colored. If using a CMYW printer such as UniNet iColor 550 or iColor 600, you can use colored substrates.

This paper is a self-trimming, meaning the toner is released and, therefore it only leaves the printed image. When purchasing this paper, you will receive a foam heat pad to use when heat pressing your image onto the substrate.

For printing mugs, we recommend using coated mugs (best results can be achieved if using polyester-coated mugs, however, other coatings may also work, and testing may be required). For uncoated matte mugs, testing is strongly recommended before mass production.

  • Ideal for smooth surfaces
  • Self-Trimming Paper
  • Works on Ceramic mugs, Ceramic Tiles, Glass
Brand Paropy
Compatible Technology Transfer Papers
Dye Blocking No
Experience Pack Text Pack
FCC Attribute Yes
Finish Matte
Ink Configuration CMY&HDK
Self-Weeding No
SIP Attribute Yes
Unit Sell pack
Peel Cold
Equipment
Image Mirror
Pressure Medium to Heavy
Application Temperature 300°F (150°C)
Time 150-180 seconds
Equipment Used Laser Printer
Wash Temperature Up To 105F (40C)
Hints & Tips
Imaging Instructions
  1. Feed paper into a laser printer so that the printer is printing on the printable side (white gloss coated side).
  2. Design your image and resize it if necessary.
  3. Set mug press temperature and time and let the mug press reach the set temperature.
  4. Tape transfer onto the mug with heat tape. Image facing the mug.
  5. Place mug in press and close. Use medium to heavy pressure. Do not use Teflon sheets when pressing.
  6. Once mug press beeps, remove mug from the press. Cool the mug using hot/warm water, then cold water. Once the mug is cool, peel the transfer.
  7. Place mug in glazing unit or oven for 1-2 mins or 5 mins respectively. This will help the image the be more scratch-resistant.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Drawer Title
Similar Products