Pearl Coating™ 20oz Sublimation Stainless Steel White Tumbler - Pack of 5

Press Temperature: 320°F |  Time: 6 minutes (test in your oven for accurate time) | Peel: Hot

1. Print your design. Don't forget to mirror.
2. Secure your transfer to the tumbler using heat resistant tape. The transfer should not extend past the edges of the tumbler.
3. Place the tumbler inside the shrink wrap centering it as best you can.
4. Use a heat gun on a low setting to shrink the wrap to the contour of the tumbler, it is best to start on the side away from the transfer first.
5. Repeat steps 2 through 4 for each item you wish to sublimate in the production run.
6. When the items are ready place them into a preheated convection oven.
7. Once the item is finished sublimating, remove the shrink wrap and sublimation paper. It may break into smaller pieces that just have to be pulled off the item.
8. Leave on the table to cool down.