20oz Stainless Steel Tumblers are perfect for hot or cold drinks. They have standard designs that fit in most cup holders.
Personalize with a logo, monogram, or your design, and keep your cold and hot drinks cold! It has a narrow bottom that fits most standard cup holders.
- Made of Stainless Steel
- Slot to sip drink – does not close.
- Note: Due to its unique shape, this product is not suitable for full-wrap designs.
Printing Methods:
- Convection Oven - Requires a Shrink sleeve. We recommend W 5.9” x H 9.84” (P-SUB-SF-150250).
Please remove the lid before placing it in a convection oven
Brand | Pearl Coating™ |
---|---|
Color | Silver |
Compatible Technology | Sublimation |
Dependent Quantity | No |
Dishwasher Safe | No |
FCC Attribute | Yes |
Microwave Safe | No |
Mug Element | Convection Oven Only |
Printable Area | 3.4" x 6.7" (8.7 x1 7cm) |
Quantity Unit | 5 Tumblers/ Pack |
Recommended Shrink Sleeve | W 5.9” x H 9.84” (P-SUB-SF-150250) |
SIP Attribute | Yes |
Size | 20oz |
Unit Sell | pack |
Peel | |
---|---|
Equipment | Convection Oven |
Image | Mirror |
Pressure | |
Application Temperature | |
Time | |
Mug Element | Convection Oven Only |
Mug Press Imaging Instructions | |
Convection Oven Instructions | Press Temperature: 320°F | Time: 6 minutes (test in your oven for accurate time) | Peel: Hot Print your design. Don't forget to mirror. Secure your transfer to the tumbler using heat resistant tape. The transfer should not extend past the edges of the tumbler. Place the tumbler inside the shrink wrap, centering it as best you can. Use a heat gun on a low setting to shrink the wrap to the contour of the tumbler, starting on the side away from the transfer first. Repeat steps 2 through 4 for each item you wish to sublimate in the production run. When the items are ready, place them into a preheated convection oven. Once the item is finished sublimating, remove the shrink wrap and sublimation paper. It may break into smaller pieces that just have to be pulled off the item. Leave on the table to cool down. |