Skip to content
en
CAD

Welcome to Joto Imaging Supplies! Helping Businesses Since 1989

Our Toronto warehouse is moving. Expect possible delays in processing and shipping. Thanks for your patience!

MultiCut™ BlockOut Heat Transfer Vinyl 20"

Regular price $419.40

CF-4UL510-30

  • 6 yards
  • 30 yards
  • 9 yards
  • 20"
  • Yellow
  • White
  • Light Blue
  • Orange
  • Red

This transfer vinyl blocks dye migration on polyester and has a super-thin soft hand. Because this vinyl has a high opacity, it is perfect for jerseys. This vinyl requires a press time of 15 seconds at 310-330F using medium pressure.

MultiCut™ BlockOut Heat Transfer Vinyl 20" - Joto Imaging Supplies Canada
MultiCut™ BlockOut Heat Transfer Vinyl 20"

For BlockOut White color, please go to BlockOut Soft

MultiCut BlockOut has a special blockout intermediate layer that prevents dye migration from dyed polyester fabrics. This transfer vinyl has a self-adhesive liner with a pleasantly soft touch. The vinyl is a Sublimation-resistant, meaning that even high temperatures will not cause any sublimation inks to bleed through the garment.

Blockout has excellent opacity which allows for the printing of graphics onto white, light-colored shirts or black dark colored shirts without affecting the colors.

  • High Opacity
  • Dye Resistance
  • Self Adhesive
  • Can Be Applied to Polyester, cotton, polyester/cotton blends, and polyester/acrylic blends

 

 

Brand MultiCut
Carrier Sheet Adhesive
Compatible Fabric Cotton|Polyester|Cotton/Polyester|Satin
Compatible Technology Transfer Vinyls
Cutting Blade 45 degree
Dye Blocking Yes
FCC Attribute Yes
Finish Matte
SIP Attribute Yes
Unit Sell roll
Vinyl Adhesive Polyurethane-hotmelt
Vinyl Liner PET-film, self-adhesive
Vinyl Thickness 0,125 +/- 5
Vinyl Transfer Film Polyurethane, cast
Peel Warm
Equipment
Image Mirror
Pressure Medium
Application Temperature 310-330°F (155-165°C)
Time 15 seconds
Equipment Used Cutter
Cutting Blade
Recommended Cut Force 120gf
Wash Temperature Up To 105F (40C)
Hints & Tips
  • Cutting Notes 
    You should always test cut prior to any production run. Cutter settings may need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
  • Care Instructions
    Machine wash using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not iron directly onto this material. Wash Temperature should not exceed 140F.
  • Storage
    MultiCut-Ultra has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight, and humidity. Keep backing free of dust and other particles

Do not use a Teflon sheet  when pressing

  • 100% cotton 
  • 100% polyester 
  • Poly/cotton blends 
  • Polyester knits 
  • Polyester mesh 
  • Poly/foam & cotton caps 
  • Satin
Imaging Instructions
  1. Feed material into the cutter so that the matte side is face up. 
  2. Design and cut your graphic in reverse (mirror image). 
  3. Weed away excess material using tweezers or weeding tool. 
  4. Preheat your fabric and position weeded image on a shirt with Glossy side face up. 
  5. Heat press the material onto the shirt. Press at 310-330F for 15 seconds. Use medium pressure. Do not use Teflon sheets when pressing Step 6
  6. Peel Mylar backing warm.

For blockout soft (White), please check out instructions under SUPPORT, DOWNLOADS & TEMPLATES tab.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Drawer Title
Similar Products