Multi Bypass Tray for Ricoh/ Sawgrass Printers

Multi Bypass tray allows your Ricoh sublimation printer to print slightly larger size papers. Choose your model from the list above

• SG400/SG500 Bypass Tray
  This additional, optional multi bypass tray allows your Sawgrass Virtuoso SG400/ SG500 dye-sublimation printer to print beyond 8.5" x 11" and up to 8.5" x 21” paper and longer. The multi bypass tray is attached to the back of the printer and offers an additional paper capacity of up to 100 sheets.
  • Capacity: 100 sheets
  • The width does not change for this model of printer.
• SG800/SG1000 Bypass Tray
  This additional, optional multi bypass tray allows your Sawgrass Virtuoso SG800/ SG1000 dye-sublimation printer to print beyond 11" x 17" and up to 13" x 19" paper and longer. The multi bypass tray is attached to the back of the printer and offers an additional paper capacity of up to 100 sheets.

• Capacity: 100 sheets
• Accepted Paper Size:
• Letter (8.5" x 11")
• Legal (8.5" x 14")
• 11" x 17"
• 12" x 18"
• EXE (7.25" x 10.5")
• Half Letter (5.5" x 8.5")
• A3 (16.5" x 11.7")
• A4 (8.3" x 11.7")
• A5 (5.8" x 8.3")
• A6 (4.2" x 5.8")
• Acceptable Paper Weight: 13 67 lb. Bond/140 lb. Index (60 256 g/m)

Setting up your Bypass Tray

Before setup:

• Make sure the printer is off and unplugged
• Take the Bypass Tray out of the box and remove the tape
• Turn the printer off and unplug the printer
• Grab a coin. It will come in handy later we promise!

Setting Up SG400/SG500 Bypass Tray

1. First go to the back of your printer, push in two gray tabs to slightly open the back.
2. Now that the rear door is slightly opened, using your thumbs pull down the noise cancellation cover. This looks like little fan slots on the rear door.
3. Close the rear door, making sure the gray tabs have clicked back in. The noise cancellation cover will look like an open flap.

Setting Up SG800/SG1000 Bypass Tray

1. First go to the back of your printer, push in two gray tabs to slightly open the back.
2. Now that the rear door is slightly opened, using your thumbs pull down the noise cancellation cover. This looks like little fan slots on the rear door.
3. Close the rear door, making sure the gray tabs have clicked back in. The noise cancellation cover will look like an open flap.
4. Now, grab the coin of your choice and coin screw to attach the L-shaped anti-topple stand to secure the bypass tray. This will help the tray stay in place while printing.
5. To attach the bypass tray to your printer, press the two gray tabs on both sides of the bypass tray.
6. While these are pushed down, fit, and push the bypass tray into the printer until it clicks.
   • Make sure the gray tabs on the side of the bypass tray are pushed back out into their original position.

Tips

• Make sure to attach the bypass tray before turning the printer on if you bought the additional tray and printer at the same time.
• If the bypass tray does not “click in” try pushing down the gray buttons and moving it up and then to the left.
• Make sure to put 3-5 sheets of paper in the bypass tray so the printer can detect the paper!